Low Voltage Distribution
The provided Din Type LV HRC Fuse Base and Fuse Switches can be consolidated to make distribution systems having wanted number of electrical circuits. Because of the smaller plan, these are especially reasonable for distribution application in distribution boards, feeder pillars and service cabinets. The body is composed of glass fiber polyester on which the tin-plated fuse or spring stacked silver contacts are attached. Our Din Type LV HRC Fuse Base and Fuse Switches are secured with cover of protecting material for included safety from inadvertent contact. These are darted legitimately to the transport bars. However, the bases terminals are tin or plated copper. They generally comply with DIN 43623 standard. These are offered with vertical droppers for wire connection at base.
Our Distribution Boards and Feeder Pillars has over ip55 protection class. The structure is powder coated while it is floor mounted or flange connected. This additionally has removable covers and doors. It is complete modular in design. However, the doors possess removable lift off pivots with 130°-180° opening point as well as are fitted with neoprene or epdm seals with a scope of locking system. The provided Distribution Boards and Feeder Pillars has a large wire entry room from the base through removable wire gland plates in which switch boards are provided in various mix of off-load isolators and circuit units as demanded by the client. Bus bars are of electrolytic copper that are supported on non-hygroscopic hylam or dmc that are inflexibly fixed on to the casing work.